wiki:BeckmannEgle

Version 4 (modified by dani, 15 years ago) (diff)

--

Beckmann+Egle

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/beckmann-und-egle-100.png?format=raw

This driver supports the serial "Mini-Terminals" made by Beckmann+Egle:

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/mt20x4-kit.jpg?format=raw

With the upcoming 0.10 version of lcd4linux, the new CompactTerminals will be supported, too.

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/ct20x4.jpg?format=raw

These controllers provide a lot of additional features, and my be extended with various modules:

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-key2x4.jpg?format=raw Key Module

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-io.jpg?format=raw I/O Module

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-net-a.jpg?format=raw LAN Module

With the current lcd4linux 0.9.11, only the following "MultiTerminal?" display types are supported and must be specified in the configuration with the Type key:

Type Columns Rows 0 16 1 1 16 2 2 16 4 3 20 1 4 20 2 5 20 4 6 24 1 7 24 2 8 32 1 9 32 2 10 40 1 11 40 2 12 40 4

Configuration:

The driver needs/supports the following entries in lcd4linux.conf:

  • Display: "BLC100x")
  • Port: serial device the device is attached to (e.g."/dev/ttyS2")
  • Type: [columns]x[rows], e.g."40x4")

Attachments (6)

Download all attachments as: .zip