wiki:BeckmannEgle

Version 2 (modified by dani, 14 years ago) (diff)

--

Beckmann+Egle

http://lcd4linux.sourceforge.net/display/beckmann-egle/beckmann-und-egle-100.png

This driver supports the serial "Mini-Terminals" made by Beckmann+Egle:

http://lcd4linux.sourceforge.net/display/beckmann-egle/mt20x4-kit.jpg

With the upcoming 0.10 version of lcd4linux, the new http://www.bue.de/produkte-und-dienstleistungen/ct.htmlCompactTerminals will be supported, too.

http://lcd4linux.sourceforge.net/display/beckmann-egle/ct20x4.jpg

These controllers provide a lot of additional features, and my be extended with various modules:

http://lcd4linux.sourceforge.net/display/beckmann-egle/xm-key2x4.jpg Key Module

http://lcd4linux.sourceforge.net/display/beckmann-egle/xm-io.jpg I/O Module

http://lcd4linux.sourceforge.net/display/beckmann-egle/xm-net-a.jpg LAN Module

With the current lcd4linux 0.9.11, only the following "MultiTerminal?" display types are supported and must be specified in the configuration with the Type key:

Type Columns Rows 0 16 1 1 16 2 2 16 4 3 20 1 4 20 2 5 20 4 6 24 1 7 24 2 8 32 1 9 32 2 10 40 1 11 40 2 12 40 4

Configuration:

The driver needs/supports the following entries in lcd4linux.conf:

  • Display: "BLC100x")
  • Port: serial device the device is attached to (e.g."/dev/ttyS2")
  • Type: [columns]x[rows], e.g."40x4")

Attachments (6)

Download all attachments as: .zip