wiki:BeckmannEgle

Version 13 (modified by michael, 14 years ago) (diff)

--

BIG FAT WARNING: This documentation has not yet been adapted for LCD4Linux-0.10!

Beckmann+Egle

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/beckmann-und-egle-100.png?format=raw

This driver supports the serial "Mini-Terminals" made by Beckmann+Egle:

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/mt20x4-kit.jpg?format=raw

With LCD4Linux-0.10, the new CompactTerminals are supported, too:

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/ct20x4.jpg?format=raw

These controllers provide a lot of additional features, and my be extended with various modules: (from left to right: key module, I/O module, LAN module)

https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-key2x4.jpg?format=raw https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-io.jpg?format=raw https://ssl.bulix.org/projects/lcd4linux/attachment/wiki/BeckmannEgle/xm-net-a.jpg?format=raw


With the current lcd4linux 0.9.11, only the following "MultiTerminal?" display types are supported and must be specified in the configuration with the Type key:

TypeColumnsRows
0161
1162
2164
3201
4202
5204
6241
7242
8321
9322
10401
11402
12404

Configuration:

The driver needs/supports the following entries in lcd4linux.conf:

Display: "BLC100x")
Port: serial device the device is attached to (e.g."/dev/ttyS2")
Type: [columns]x[rows], e.g."40x4")


Attachments (6)

Download all attachments as: .zip